• Image 04
  • Image 01
  • Image 03
  • Image 02
  • Image 05

Pedestrians

Article

Great streets not only move traffic, but also serve as public places supportive of a variety of activities. Quality environments are created when right-of-way is appropriately allocated to accommodate all modes of travel and create comfortable and enjoyable public spaces.

Creating a safe and inviting pedestrian environment entails more than just providing sidewalks - it is important to recognize that people walk for different reasons in various types of places, and that a number of specific components influence the pedestrian-friendliness of an area.

Reasons People Walk

The five basic types of walking include:

Utilitarian Walking - People walk to destinations such as work, school or shopping areas. Most auto and transit trips include utilitarian walking to reach the final destination.

Rambling - People ramble as a recreational activity, typically for exercise or enjoyment. Rambling may include walking the dog, pushing a baby carriage, jogging, or walking briskly for exercise.

Strolling/Lingering - In certain settings, people stroll and linger. They may stand on the sidewalk and talk with others they meet, sit on a bench, or people-watch during an outing.

Promenade - People walk to be seen and interact with other members of the community (e.g. high school students who promenade in groups in shopping malls).

Special Events - People walk at farmer's markets, public concerts, parades, arts festivals and other community events.

Types of Pedestrian Environments

Walking environments can be divided into four basic categories based on pedestrian-friendliness:

Pedestrian Intolerant Environments - Walking is unsafe and unattractive in these environments, as shown in the image below, at left. Examples include freeway corridors, certain industrial or extraction land uses, landfills, and major thoroughfares lacking continuous sidewalks. A major characteristic of pedestrian intolerant environments is that they lack pedestrians, either due to a lack of pedestrian accommodations and/or dominance by auto traffic and auto-oriented land uses.

Pedestrian Tolerant Environments - These environments provide pedestrian facilities, but at a minimal level of accommodation, as shown in the image below, at right. Walking is technically safe (there are continuous sidewalks and reasonably safe street crossings), but land use patterns generate very little walking activity. Arterial street corridors, remote or rural thoroughfares, and certain light industrial or warehousing areas will attract limited amounts of utilitarian walking, and will not appeal to recreational walkers or strollers. 

Pedestrian intolerant environment
Credit: CAI
Pedestrian tolerant environment
Credit: CAI

Pedestrian Supportive Environments - These are well-designed residential areas, commercial and employment centers, parks, and recreational areas, as shown in the image below, at left. Sidewalks are continuous and buffered from streets, and wide enough for passing or walking side by side. Land uses are dense enough to attract utilitarian walking trips or recreational walkers and joggers.  Streets are abutted by buildings, not parking lots, and adequate street crossings are provided.  

Pedestrian Places - These districts have mixed land uses, moderate to high densities, good transit service, and extensive pedestrian amenities, as shown in the image below, at right. People will walk for utilitarian and recreational purposes. Pedestrian Places feature people of all ages moving between multiple activities. Typically, at least three unique, highly identifiable areas such as outdoor seating, a water feature, public art, or pedestrian-oriented shopping will be located in close proximity.

Pedestrian supportive environment
Credit: CAI
Pedestrian place
Credit: CAI

Components of the Pedestrian Environment

The majority of pedestrian environments are mostly contained by thoroughfare right-of-way. Although pathways through parks and open space and short mid-block connections in downtown neighborhoods function as pedestrian environments, the principal infrastructure for walking will always be the street system.

The roadway corridor, pedestrian realm, and adjacent land uses are crucial elements in the design of pedestrian environments in all place types.

  1. The Roadway Corridor Creating good pedestrian environments requires careful attention to the design of thoroughfares, the allocation of space within street rights-of-way, the spacing, length and treatment of street crossings, and intersection signal timing. In general, higher adjacent traffic volumes moving at faster speeds on wider thoroughfares create less pedestrian-friendly conditions.

  2. The Pedestrian Realm Also referred to as the roadside zone, this area includes both the sidewalk and the buffer zones on either side that separate the walkway from motor vehicle traffic and link the walkway to adjacent properties. Greater separation from the street is generally provided where higher vehicular travel speeds are present, and additional walkway width in areas with more pedestrian traffic.

  3. Adjacent Land Use Sidewalks alone do not create a pedestrian destination. A combination of residential, lodging, retail, restaurant, civic, or employment uses must be present within a contiguous area to draw a significant pedestrian presence. Attractive pedestrian environments include buildings with numerous doors and windows framing the street, a fine-grained street grid, and parking located on-street or internal to the block.

Pedestrian realm cross section
Credit: Charlier Associates

Components of the Pedestrian Realm

The two most obvious characteristics of sidewalks are:  how wide they are and how that width is used.  However, there are many other important characteristics, including shade, separation from the street, urban scale and so forth. The graphic image at right shows the principal parts of urban sidewalks (the pedestrian realm).  Good sidewalks are as much about the orderly arrangement of these parts as they are about width.

  1. Planting Strip/Furnishings Zone.  This is the area between the edge of the sidewalk (usually a curb) and the walkway. In most of the place types – Downtown Main Street, Mixed Use District, Small Town Downtown, and Neighborhood Shops – this area is called the “furnishings strip” and should be paved.  This is the proper place for above-ground utilities – light poles, fire hydrants, signal control boxes, parking meters, etc. – and for various amenities – benches, newspaper boxes, street trees (in tree wells), bicycle parking, etc. 

    In single-family detached and other types of low density Residential Neighborhoods, this zone should be designed as a “planting strip” or “parkway” and should be landscaped with ground cover vegetation and street trees.  In higher density Residential Neighborhoods with multi-family housing and in the Office Employment Area, Civic/Educational Corridor and Commercial Service Corridor place types, the choice of whether to provide an urban sidewalk with a paved furnishings zone or a suburban sidewalk with an unpaved planting strip should be based on the ground level land use and other considerations such as overall density.

    This zone of the pedestrian realm performs a number of key functions.  Obviously, it provides space for furnishings, above-ground utilities and street trees.  However, it also provides space for snow storage in the winter (so that plows don’t cover sidewalks when they are clearing streets).  It separates the pedestrian walkway from moving traffic in the street, increasing pedestrian comfort and safety.  Finally, it allows the walkways to be lined up with appropriately placed curb ramps and crosswalks at intersections.

  2. Walkway. This is the primary area allocated to walking. Pedestrians can be in the furnishings zone and in the setback area, but most linear walking will occur in the walkway part of the sidewalk. This area should be paved in all of the place types. Recognizing that walking, especially strolling and lingering, is a social activity, the clear zone will vary in width depending on place type and intended levels of pedestrian use. This zone is typically included as part of the street right-of-way, but  is may be located on public right-of-way, adjacent private property, or a combination of both to provide the necessary width for an unobstructed walkway in urban areas.

  3. Frontage Zone. Also known as the setback zone/adjacent land use, most pedestrians do not feel comfortable walking immediately adjacent to a building, wall, or fence. Instead, they tend to keep some "shy distance" away from the adjacent vertical structure. This space is called the building frontage zone, and accommodates protruding architectural elements, stoops, opening doors, vegetative planters, sidewalk displays, window shopping activities, etc.

    The frontage zone is typically located on private property, but may extend into the street right-of-way. Many cities regulate how far from this line buildings should be placed (set back). In traditional suburban style ordinances, large setbacks are required and often this area is required to be landscaped. That approach can be appropriate in the Residential Neighborhood, Office Employment Area, Civic/Educational Corridor and Commercial Service Corridor place types, although that will tend to “lock in” a degree of suburban character that can be difficult to “urbanize” later.

In the Downtown Main Street, Mixed Use District, Small Town Downtown, and Neighborhood Shops place types, most modern ordinances require a “build-to” line rather than a traditional setback zone. In these places types, this area should be paved and should serve functionally to extend the practical width of the sidewalk and also as an area suitable for sidewalk seating at restaurants. In some cases, placement of small amenities and furnishings in this area can also be appropriate.

Width and Space Allocation

The proper amount of street space to be allocated to the pedestrian realm varies depending on a number of factors, including the place type, the overall width of the street, the urban scale, and other local characteristics such as climate, drainage system type, and existing building placement.

  1. Planting Strip/Furnishings Zone.  This area should generally be between five feet and eight feet in width.  Considerations in determining desirable width of the planting strip/furnishings zone include:

    • There should be enough space to provide for natural irrigation of street trees and accommodation of tree root balls.
    • This zone should not be inappropriately wide relative to the overall width of the pedestrian realm.  Generally, it should not be wider than the walkway zone.  In areas where existing conditions force a narrow pedestrian realm, the furnishings zone may have to be proportionately narrower, but should not be less than three feet in width.
    • In suburban and low density corridors (the Residential Neighborhood, Office Employment Area, Civic/Educational Corridor and Commercial Service Corridor place types) this zone should be landscaped.
    • Walkway width
      Credit: Charlier Associates

      Narrow sidewalks attached to the curb should be avoided in all place types.

  2. Walkway.  The width of this area should vary with the place type.  Walkways can be too narrow, obviously, but can also be too wide.  Recommended widths by place type are shown in the table below.  Note widths shown are the sum of two walkways – one on each side of the street

  3. Frontage Zone. Also known as the Setback Zone and/or Adjacent Land Use, this area should generally be kept narrow on streets where adequate width has been achieved for the furnishings “zone/planting strip” and the “walkway.” 

    Walkway width, use, type
    Credit: Charlier Associates

    However, where the public right of way width is too narrow to allow adequate sidewalks, the difference can and should be made up in the setback zone.  In such cases, the setback zone can be used to provide a wider walkway. Considerations in determining desirable width of the setback zone are shown in the table below.

Examples.  Many urban sidewalks suffer as much from inappropriate placement of objects and inappropriate allocation of space as they do from inadequate width. 

The photo below, at left (from the St. Louis region), shows an instance where an inadequate sidewalk is compounded by the inappropriate placement of utilities and careless handling of grade. In all of the more urban place types (Downtown Main Street, Mixed Use District, Small Town Downtown, and Neighborhood Shops) the ground floor of adjacent buildings should match grade with the sidewalk.

The photo below, at right (from Oahu), shows what happens when cities impose suburban standards in urban settings. The planting area between the sidewalk and the building was required by the City of Honolulu because the right of way line ends at the edge of the small green lawn and the buildings have been set back according to minimum setback requirements. 

Honolulu ordinances require this setback area to be landscaped, not paved. As a result, the businesses along this street in Kailua (Small Town Downtown), which include an ice cream shop, a restaurant and small retailers, are denied use of the setback area for sidewalk seating and the walkway width is inadequate for this place type.

Inappropriate object placement
Credit: CH2M HILL
Suburban standards in urban settings
Credit: Charlier Associates

The examples below show two streets with well-designed pedestrian realms. The photo on the left is East Pearl in Boulder (a Downtown Main Street). The sidewalk is not overly generous in width but is adequate and the space is well allocated between the three zones of the pedestrian realm. The right of way line where the setback zone begins is discernible by the pavement joint about 18” from the building fronts.

The photo on the right is from Main Street in Longmont (Downtown Main Street). Here the sidewalk width is just right for the street. Furnishings are well-placed. Again, the edge of the public right of way is discernible by the change in paving type.

Good sidewalk example
Credit: Charlier Associates
Good sidewalk example
Credit: Charlier Associates

Pedestrian Network for Neighborhood Shops

Neighborhood shops describe a cluster of locally-serving retail and service establishments. Typically, they include grocery stores, banks, restaurants, dry cleaners, bakeries, cafes and possibly gas stations. They are often located along busier thoroughfares. Parcel sizes may be larger with significant supplies of off-street parking. This, in combination with single-use zoning, may translate into less pedestrian activity than in downtown areas but every effort should be made to build a pedestrian network that includes connections between destinations within the neighborhood center and access to and from adjacent neighborhoods.

Through changes in policy and future urban infill and retrofit projects, these types of areas can become more densely developed and thus more walkable. It may be the case that the existing land uses are more suburban in nature and should adopt Pedestrian Tolerant as a minimum design standard. Pedestrian Supportive environments should be the goal for neighborhood shopping districts. These place types shall provide a basic level of accommodation (continuous sidewalks and reasonably safe street crossings) for the pedestrians present in these corridors with more automobile access and mobility.   

Roadway Corridors in Pedestrian Tolerant environments carry moderate to high traffic volumes (15-25,000 ADT) at speeds over 35 mph. On-street parking typically is not present and bicycle lanes may or may not be provided.

  • Crosswalks should be marked. Street crossing distances shall be limited by using cur radii of 30' or less, a maximum of five travel lanes to cross at once, and right-turn slip lanes that incorporate pork chop islands for pedestrian refuge.
  • Crossing frequency should be 330' - 528' with marked and signed mid-block crossings.

The Pedestrian Realm shall provide minimal levels of safe accommodation.

  • Sidewalks shall not be constructed at back of curb. A sidewalk planting strip shall be provided to buffer pedestrians from vehicular traffic (on-street bicycle lanes may also serve this purpose). The grassy planting strip shall be at least 5 feet in width; greater separation is preferred as the speed of adjacent vehicular traffic increases.
  • Sidewalks may be built at a 5' minimum width due to the low volumes of pedestrians typically found within these place types.  In areas with greater pedestrian activity, 8' sidewalks are preferred.

The Frontage Zone in Pedestrian Tolerant environments typically does not consist of building facades, but may include landscape buffers and/or privacy fences between the street and parking lots. A shy distance of 1' is recommended for separation between the sidewalk and a low wall, fence or hedge or 1.5' along tall walls and fences. Buffer vegetation shall not encroach into the pedestrian walkway.

Adjacent Land Uses in neighborhood shopping centers should plan for pedestrian activity. Site design should ensure that the following minimum criteria for Pedestrian Tolerant environments are implemented:

  • Buildings will likely be one or two stories high.  Setbacks and parking lot size should be controlled so that a height to width ratio (buildings to street corridor) of 1:10 to 1:4 can be maintained.
  • Off-street parking lots located behind, in front of, or on the sides of buildings should not exceed 20,000 sq. ft. Parking lots shall include internal sidewalks and/or walkway areas every 250' to facilitate safe pedestrian passage.
  • Landscape screening shall provide intermittent breaks for pedestrian access from the street right-of-way into the site. Privacy fences may screen views but should not limit pedestrian access to/from the street.
  • Crosswalks or raised speed tables should be used internally to help identify walk zones across parking lot driveways and at key crossing points in parking lots.